205 • End mills can be used also for drilling with the same cutting conditions. Die Schaftfräser können mit gleichen Schnittwerten auch für die Herstellung von Bohrungen verwendet werden. • Cutting speed Vc is based on max. 20.000 rpm. Schnittgeschwindigkeit Vc bezogen auf max. 20.000 U/min. • Conditions are based on pure aluminium for < 5% Si reduce feed per tooth Fz up to 10% and for > 5% Si reduce Fz up to 20%. Schnittwerte sind auf die Bearbeitung von Rein-Aluminum ausgelegt. Für Aluminium < 5% Si den Zahnvorschub Fz um 10%, für Aluminium > 5% Si um 20% reduzieren. Cutting conditions / Schnittwertempfehlungen VHAE VHAE 1 060 050 06 10 Workpiece material: Aluminium Ø 6,0 mm V c 716 m/min n 38.000 rpm F z 0,150 mm/t Z 1 V f 5.700 mm/min a p 6,0 mm a e 4,0 mm Coolant emulsion Q 136,8 cm3/min Slot milling / Nutfräsen ap max. (mm) ae max. (mm) Fz (mm/tooth) < 0,5 0,5 0,007 - 0,012 < 0,6 0,6 0,009 - 0,015 < 0,8 0,8 0,012 - 0,018 < 1,0 1,0 0,015 - 0,022 < 1,2 1,2 0,019 - 0,030 < 1,5 1,5 0,022 - 0,037 < 1,6 1,6 0,026 - 0,041 < 1,8 1,8 0,030 - 0,045 < 2,0 2,0 0,034 - 0,048 < 2,5 2,5 0,045 - 0,060 < 3,0 3,0 0,053 -0,075 < 4,0 4,0 0,064 - 0,086 < 5,0 5,0 0,075 - 0,105 < 6,0 6,0 0,094 - 0,131 < 7,0 7,0 0,100 - 0,150 < 8,0 8,0 0,105 - 0,165 < 10,0 10,0 0,135 - 0,200 < 12,0 12,0 0,165 - 0,225 < 16,0 16,0 0,180 - 0,250 Shoulder milling / Eckfräsen ap max. (mm) ae max. (mm) Fz (mm/tooth) < 1,0 < 0,15 0,010 - 0,018 < 1,2 < 0,18 0,012 - 0,020 < 1,6 < 0,24 0,016 - 0,024 < 2,0 < 0,30 0,020 - 0,030 < 2,4 < 0,36 0,025 - 0,040 < 3,0 < 0,45 0,030 - 0,050 < 3,2 < 0,48 0,035 - 0,055 < 3,6 < 0,54 0,040 - 0,060 < 4,0 < 0,60 0,045 - 0,065 < 5,0 < 0,75 0,060 - 0,080 < 6,0 < 0,90 0,070 -0,100 < 8,0 < 1,20 0,085 - 0,115 < 10,0 < 1,50 0,100 - 0,140 < 12,0 < 1,80 0,125 - 0,175 < 14,0 < 2,10 0,132 - 0,200 < 16,0 < 2,40 0,140 - 0,220 < 20,0 < 3,00 0,180 - 0,270 < 15,0 < 3,60 0,220 - 0,300 < 16,0 < 4,80 0,250 - 0,350 Ød (mm) 0,5 0,6 0,8 1,0 1,2 1,5 1,6 1,8 2,0 2,5 3,0 4,0 5,0 6,0 7,0 8,0 10,0 12,0 16,0 Material group TSR Hardness (N/mm2) HB N5.1 < 500 < 150 N5.2 < 400 < 120 N5.3 < 350 < 100 N5.4 N5.5 Cutting speed Vc m/min 350 - 650 200 - 500 350 - 500 400 - 1000 400 - 1000 Coolant emulsion / air emulsion / air emulsion / air emulsion / air emulsion / air ap ae ap ae=Ød
RkJQdWJsaXNoZXIy Nzg5MzM=